Table of Contents
Advertisement
Appendix B – Modem Commands
This register defines how long, in units of 100ms, a modem will attempt auto-detection of an error control
protocol (in answer mode) before giving up and establishing a normal (non error-controlled) connection. During
the auto-detection phase the modem will respond to an ODP sequence, HDLC flags, the configured fallback
character, or MNP2 flags. If none of these are detected within the specified time, a normal link/connection is
established.
S51
Error Correction Fallback Character
Default: 13 ('\r')
Min: 0 Max: 127
This register defines the ASCII character that, if detected repeatedly (while in answer mode) is attempting auto-
detection of an error control protocol, will cause the EC negotiation attempt to be abandoned and a normal (non
error-controlled, asynchronous) link to be established. The character must be received three times
consecutively. The default character is the Carriage Return (CR). The value of this register is in decimal.
MultiAccess Communications Server MA30120 User Guide
151
Advertisement
Table of Contents
