Modem Setup
Modem Setup screen only applies when the Modem Usage is set for RAS (Dial-in PPP). RAS usage is defined
in the Modem Usage Setup field of the Modem Usage screen.
1. Verify that the V.92 Setup parameters conform to your client's characteristics.
2. Multi-Tech recommends that you set Retrain Limit to 4 and due to compatibility issues seen with
various modems, you may wish to disable Quick Connect and V.8bis.
3. If additonal modem commands are required, refer to Appendix B, Advanced Commands.
MultiAccess Communications Server MA30120 User Guide
Chapter 2 – Installation
25