Table of Contents
Advertisement
V.8BIS and V90 Control
V.8bis is used to negotiate K56Flex™ connections. V.8bis can also advertise V.90.
A value of 0 disables V.8bis.
A value of 1 enables V.8bis but without it advertising V.90.
A value of 2 enables the advertising of V.90 within V.8bis along with advertising K56Flex. This provides support for
early implementations of V.90.
Please Note: Selecting a value of 0 or 1 does not disable the ability to establish V.90 connections, it
simply changes where V.90 is offered within the negotiation process.
Answer State Delay
The minimum setting is 0. The maximum setting is 255.
This index is used to define the delay before entering into the answer state. The delay time is specified in 100
ms increments. The default value of 20 (times 100ms) equates to 2 seconds. This index would most likely be
used in quick connect or reverse dial applications.
MultiAccess Communications Server MA30120 User Guide
Index 115 Default = 2
Index 114 Default = 20
Appendix B – Modem Commands
156
Advertisement
Table of Contents
