Table of Contents
Advertisement
To Broadcast on the Whole Internet:
To Broadcast on One Network Segment
•
Log:
will be logged. The log messages can be viewed from the Statistics&Logs >Packet Filter
>Packet Filter Livelog screen.
Confirm your entry by clicking the Add button. After a successful definition, the rule is always
Add:
added to the end of the rule set table. Entries can be edited by clicking the Edit button, which loads the
data into the entry menu. The entries can then be edited. The changes are saved by clicking the Save
button.
Rules can be deleted by clicking the Delete button.
Delete:
Important:
•
The order of the rules in the table is essential for the correct functioning of the firewall. By clicking
the Move button, the order of execution can be changed. In front of rule to be moved, enter the line
number that indicates where the rule should be placed. Confirm by clicking OK.
•
By default, new rules are created at the end of the table in the inactive state. The rule only
becomes effective if you assign the active state.
MultiAccess Communications Server MA30120 User Guide
Open the Networks menu in the Definitions directory and enter the following
1.
data:
Name: Broadcast32
IP Address: 255.255.255.255
Subnet Mask: 255.255.255.255
Confirm your entries by clicking the Add button.
2.
Open the Rules menu in the Packet Filter directory and set the packet filter rules:
3.
From (Client): Any
Service: Any
To (Server): Broadcast32
Action: Drop
Confirm your entries by clicking the Add button.
4.
Open the Networks menu in the Definitions directory. Enter the following data
1.
into the entry fields:
Name: Broadcast8
IP Address: 192.168.0.255
Subnet Mask: 255.255.255.255
Confirm your entries by clicking the Add button.
2.
Open the Rules menu in the Packet Filter directory and set the packet filter rules:
3.
From (Client): Any
Service: Any
To (Server): Broadcast8
Action: Drop
Confirm your entries by clicking the Add button.
4.
The packets matching the corresponding source address, destination address, service
Chapter 3 – Software
Packet Filters > Packet Filter Rules
73
Advertisement
Table of Contents
