Table of Contents
Advertisement
User Authentication
RADIUS (Remote Authentication Dial-In User Service) is a protocol responsible for receiving user
connection requests, authenticating the user, and then returning all configuration information necessary for the
client to deliver service to the user. The Radius Server menu consists of three screens, General Setup, User
Setup and Default User Setup.
The intended purpose of the MultiAccess's RADIUS Server is for use with the MultiAcces's RADIUS Client.
This RADIUS Server can serve the internal Radius Client or MultiAccess RADIUS Clients external to this unit
(other MultiAccess units). This RADIUS Server uses (serves) Ethernet 1. The IP address of Ethernet 1 is the
IP address of this RADIUS Server.
When the RADIUS Server and RADIUS Client are in the same unit\server, the IP Address for each must
Note:
be that of Ethernet 1 (eth0).
•
The General Setup Screen is used to add RADIUS clients to this server.
•
The User Setup Screen is used to create a RADIUS user database.
•
The Default User Setup screen is used to define common parameters to all RADIUS users.
MultiAccess Communications Server MA30120 User Guide
User Authentication > RADIUS Server > General Setup
> RADIUS Server > General Setup
Chapter 3 – Software
80
Advertisement
Table of Contents
