Table of Contents
Advertisement
Chapter 2 – Installation
Fax Setup
Fax setup is initiated when you allocate modem(s) to the integrated Hylafax™ Fax Server. This is achieved by
setting the selected modem's usage to Fax. If no modems are set for fax usage, then only the General Fax
Setup section is displayed. The Fax Setup screen is used to configure the integrated Hlyfax Server for sending
and receiving faxes.
The sending of outbound faxes via the Hylafax Server requires the use of a Hylafax compatible Fax Client
software, e.g., Multi-Tech's FaxFinder Client. The General Fax Setup group is used to add Fax Clients to the
Hylafax server.
The Fax Client must be installed on each workstation that you wish to send faxes from. The Fax Client must
use the credentials defined in the General Fax Setup group to submit faxes for sending. The Fax Client is not
used for receiving faxes.
Inbound faxes received from the T1/E1 digital line are converted to tiff files and then emailed from the Hylafax
server to the specified recepient. The Fax Delivery Setup group is used to configure the routing of inbound
faxes.
MultiAccess Communications Server MA30120 User Guide
26
Advertisement
Table of Contents
