Table of Contents
Advertisement
Chapter 3 – Software
Applied
This menu lists updates that have been applied to the unit since it's hard drive image was created. This menu
also provides the ability to remove updates. The screen shot below indicates this unit's original version was
1.10 and that version 1.11 and 1.12 have been applied to it.
Setup
The Setup menu allows for the administrator to define the location of the update server. This would be
necessary in situations were network security is foremost.
The administrator would most likely use a separate workstation to manually down load the appropriate update
files from update.multitech.com, and then put them on a private internal FTP server. Appropriate files are
defined as a version.tar.gz and a version.html file per MA30120 version.
The IP address or DNS resolvable internal name of this private FTP server would be defined in the Update
Server field. The update files must be placed in the correct/default directory of the FTP server.
The Update Server field is limited to a host address (do not specify a sub directory on the FTP server). The
Update Client can not instruct the FTP session to change directories on the FTP server. The FTP server must
allow binary file transfer.
The Update Client in the MultiAccess uses anonymous credentials when logging into the Multi-Tech
Note:
Update server and when logging into a user define update server.
MultiAccess Communications Server MA30120 User Guide
69
Advertisement
Table of Contents
