Table of Contents
Advertisement
Chapter 3 – Software
User Authentication > RADIUS Client
Remote Host Address
Remote Host Address is an address pool that is assigned to dial in users. Click on the check mark window
and enter the starting IP address of your pool. The IP address needs to have a + (plus symbol) after the
number (e.g., 192.168.1.150+). The plus symbol instructs the "portslave" to create an address pool starting
with the address you have entered. Portslave determines the "ending" address number by adding up all the
Line Interface selections that have their "Port Selection" set to "All". If the MultiAccess server has multiple
line interface modules and all ports are to use an address pool, set this field to the same address
(192.168.1.150+) for each line interface.
DNS Server Address 1
This is the IP address of the primary name server. This identifies the name server for remote access users.
Click on the check mark window and enter the IP address of the main DNS server.
DNS Server Address 2
If a secondary or back up DNS server is used in your network, click on the check mark window and enter
the IP address of the secondary or back up DNS server.
Modem Greeting
The modem greeting is sent to the remote user upon connection. If you want to customize the modem
greeting you can edit the greeting.
MultiAccess Communications Server MA30120 User Guide
79
Advertisement
Table of Contents
