Table of Contents
Advertisement
Confirm your entries by clicking the Add button. After a successful definition, the new network is entered
into the network table. This network will now be referenced in other menus under this name. You can edit
and delete networks by clicking Edit or Delete in the Options column for the network you want to change.
The name of the network can not be changed, but the IP Address and Subnet Mask can be edited. You
can delete a newly created network by clicking on Delete in the Options column for a desired network.
Added networks are displayed in the following functions:
Web Admin
1.
SSH
2.
Packet Filter Rules
3.
Network Intrusion Detection
4.
Routing
5.
Masquerading
6.
SNAT
7.
DNAT
8.
These names will be made available to:
Add allowed networks for Web Admin
1.
Add packet filter rules
2.
Add source, destination networks for Network Intrusion Detection
3.
Add routes in routing, SNAT, masquerading, portscan detection and DNAT sections.
4.
MultiAccess Communications Server MA30120 User Guide
Chapter 3 – Software
Networks & Services > Networks
51
Advertisement
Table of Contents
