Network Setup > Cellular Modem; Save & Restart - Multitech SF100-G User Manual For System Administrators

Network Setup > Cellular Modem
Use this screen to configure the cellular modem.
Initialization Strings
Initialization Strings 1 – 3
Initialization strings are composed of AT commands sent to the modem to initialize and prepare it for
connection. These strings typically set options such as speed, error correction, compression, various
timeout values, and various display parameters. See the GPRS AT Commands Reference Guide.
Save
Click the Save button.
Signal Strength (for GSM Cellular only)
Command
The string entered here is sent to the cellular modem so that the signal strength LEDs can display the
current signal strength. Use the following command: AT+CSQ
See the Signal Strength LEDs Reference Table on page 8.
Save
Click the Save button.
SIM Number
SIM Number
Specify the cellular phone number that the wireless provider assigned to your account. Do not enter
dashes. Example:
SIM Notes
•
The SIM card reads real time from the network and this provides the time stamp for SMS
messages.
•
If your SIM card is locked, you cannot sent SMS messages.
Save
Click the Save button.
Save & Restart
IMPORTANT Note About Save & Restart
When you have completed your SMSFinder settings and you are not going to enter any more data, you
must click the Save & Restart button located under the menu bar. The system will save the new settings
to the Flash Memory and give you the option to restart your SMSFinder. Saving to the Flash Memory
saves the new settings in the flash prom and prevents the settings from getting lost at the next power up.
Note: The system will save the SMS settings every 8 hours automatically; however, it will not save the
system setting during this automatic save. The automatic saving of the SMS settings is helpful for
those times when the administrator does not have direct access to the Ethernet port.
Save
Click the Save button to save your system settings to the flash memory.
Restart is Optional
This is optional. You do not have to restart the SMSFinder after saving to the flash memory.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
6126361654.
Chapter 4 – Using the SMSFinder's Web Interface
Network Setup > Cellular Modem
31