Table of Contents
Advertisement
Chapter 3 – Software
Modem Setup > Modem Setup
Modem Setup
> Modem Setup
This screen applies to all the modems set to a RAS usage. This screen allows you to set the parameters most
important for modem performance. Parameters such as the time to establish a connection, whether to enable
the modem-on-hold feature, error recovery, etc.
V.92 Setup
Quick Connect –
You can enable or disable Quick Connect or select Short Phase 1 only or Short
Phase 2 only. V92 Quick Connect is a feature that allows V92 clients to use previously obtained line quality
configuration data to speed up portions of the negotiation process.
Disabling this feature dictates the modems should use configuration data determined by a line probe during the
negotiation process. Enabling this feature allows the V92 client to dictate configuration information used for
both the V8 portion (phase 1) and the modulation portion (phase 2).
Line conditions can change. With this feature enabled and if line conditions change, it could actually
Note:
increase the connect time slightly.
MultiAccess Communications Server MA30120 User Guide
93
Advertisement
Table of Contents
