Table of Contents
Advertisement
Raw Mode - If Yes, this sets the TCP port to a RAW socket. User data is treated "as is" and the Telnet
Command Escape capability is disabled. If No, this allows the Telnet command parser to look for escape
sequences that are used to communicate control functions. A common example is to support RFC-2217
Com Port Control.
Pool - If you want to access a specific modem, accept the default of No. Each modem will be given a
specific TCP port number, starting at 7000+. If you select pool = Yes, then all selected modems are
accessed via port number 6000 – creating a first available pool, starting with the lowest numbered tty port.
SSL - Support is made available when the usage is Modem Sharing with Authentication. This is only
used with SSL capable Telnet Clients. Site Certificate information needs to be configured appropriately.
Contact Multi-Tech Tech Support for additional information.
Idle Timer (seconds) - The Idle Timer, upon expiring, will hangup the modem and close the telnet socket.
Idle time is defined as no data flow in both directions. Any data sent or received across the socket will
cause the Idle Timer to start over. When there has been no data activity for the duration specified, the idle
timer will expire.
Monitor CD - Upon the modem disconnecting, the MultiAccess will close the telnet socket to the host
application server.
4. Click on the Save button.
MultiAccess Communications Server MA30120 User Guide
Chapter 2 – Installation
23
Advertisement
Table of Contents
