Table of Contents
Advertisement
This field is for selecting the protocol to be used for framed access.
IP Address
This field indicates the IP address the framed user is to use. A value of 255.255.255.255.254 instructs
the NAS equipment to give the user an IP address from an address pool defined within the NAS
equipment, referred to as a dynamic IP address. A value of 255.255.255.255 instructs the NAS
equipment to let the user pick it's own IP address. A unique specific value can also be defined, i.e.,
206.37.212.39, referred to as a static IP address.
Netmask
This field indicates the subnet mask that should be applied to this connection.
MTU
This field is for entering the maximum allowable PPP framed size. Utilmately the actual size used in
negotiation per connection.
Hint
This field is for entering additional matching criteria depending on the hint.
Routing
This field is for selecting the routing method of the user when the user is a router.
Fall Through
If this is set to Yes, it tells Radius to continue looking up other records even when the record at hand
matches the request. It can be used to provide several default values or parameters.
Description
This field is for entering the description of the entry. You have to add a description in this field before you
can click Add Default button. This will be displayed on the Default Settings table.
MultiAccess Communications Server MA30120 User Guide
Chapter 3 – Software
87
Advertisement
Table of Contents
