Table of Contents
Advertisement
User Authentication
This Add New Default User Setup screen is displayed by clicking on the Add New Default button from the
Radius Server > Default User Setup screen.
Auth Type
This field is for selecting the type of authentication. This field must be set to System.
Service Type
This field is for selecting the type of service the user will be requesting or provided to them.
Compression
This field is for selecting the Van Jacobson-TCP-IP compression, applies to Framed protocol PPP.
Idle Timeout
This field is for entering the maximum number of consecutive seconds of idle connection allowed before
termination of the session.
Protocol
MultiAccess Communications Server MA30120 User Guide
User Authentication > RADIUS Server > Default User Setup
> Radius Server > Default User Setup
Chapter 3 – Software
86
Advertisement
Table of Contents
