Multitech MultiAccess MA30120 User Manual page 84

Chapter 3 – Software
User Authentication > RADIUS Server > User Setup
Confirm Password
Confirm the password entered above by entering it again.
Auth Type
This field defines where the Radius Server is to look for the user's credentials and dictates the format of
how the password is stored. The default value is "Local" and currently this is the only option supported.
Local means the value of Password is clear text.
If you check one of the following User attributes, it will over ride the default value defined in the Default
User Setup menu.
Service Type
This field indicates the type of service the user is to be provided. Values of "framed" or "outbound" are
supported.
Compression
This field indicates if Van Jacobson IP compression is to be allowed (applies to Framed protocol PPP).
Idle Timeout
This field indicates to the NAS equipment how long the user can be idle in seconds while connected,
applies to Framed protocol PPP.
Protocol
This field indicates the type of framed service the user is to be provided.
IP Address
This field indicates the IP address the framed user is to use. A value of 255.255.255.255.254 instructs the
NAS equipment to give the user an IP address from an address pool defined within the NAS equipment,
referred to as a dynamic IP address. A value of 255.255.255.255 instructs the NAS equipment to let the
user pick it's own IP address. A unique specific value can also be defined, i.e., 206.37.212.39, referred to
as a static IP address.
IP Netmask
This field indicates the subnet mask that should be applied to this connection.
Routing
This field indicates the routing function for when the user is a router.
Filter ID
This field indicates to the NAS the filter policy that should be applied to this connection.
MTU
This field indicates the max allowable PPP frame size. Utimately the actual size used in a negotiated per
connection.
Add
Click the Add button to this user to the Radius User data base.
MultiAccess Communications Server MA30120 User Guide 84