Table of Contents
Advertisement
Chapter 3 – Software
Modem Setup > Fax Setup
Modem Setup
> Fax Setup
The Fax Setup screen is used to configure the internal Hylafax server. If no modems are set for fax usage, only
the General Fax Setup section is displayed. A Hylafax compatible fax client, like the Multi-Tech FaxFinder
Client (a copy of which is found on the software CD that ships with the MultiAccess) is needed to send faxes via
the MultiAccess to remote dial-up fax destinations. The General Fax Setup field establishes a data base of
credentials used by fax clients to log into the Hylafax server (preventing unauthorized use of the Hylafax
server). Inbound faxes (received by Hylafax from remote dial-up fax locations) are sent as .tif attachments to
emails generated by the Hylafax server. The Fax Modem Setup group sets the port identification and other
administrative details. The Fax Delivery Setup group defines how incoming faxes are distributed.
Inbound faxes are sent as .tif attachments to emails generated by the MultiAccess. Hylafax converts the
contents of the fax (all pages) into one .tif file and attaches it to the email. The full name of the attachment will
MultiAccess Communications Server MA30120 User Guide
95
Advertisement
Table of Contents
