Table of Contents
Advertisement
Change Password
You should change the password immediately after initial installation and configuration, and also change it
regularly thereafter. Only alphanumeric characters are allowed. To change the password, enter the existing
password in the Old Password field, enter the new password into the New Password field, and confirm your
new password by re-entering it into the Confirmation entry field.
Use secure passwords! For example, your name spelled backwards is not secure enough;
Caution:
something like xfT354 is better.
Time Before Automatic Disconnect
An automatic inactivity disconnection interval is implemented for security purposes. In the Time Before
Automatic Disconnect entry field, enter the desired time span (in seconds) after which you will be
automatically disconnected from Web Admin if no operations take place.
After the initial installation, the default setting is 3000 seconds. The smallest possible setting is 300
seconds. If you close the browser in the middle of an open Web Admin session without leaving Web Admin
via Logout, the last session stays active until the end of the time-out.
If you do not logout, the next attempt to login, during the unexpired duration, will give you a pop-up stating
"someone else is logged in – Do you want to kick them out?
WebAdmin HTTPS Port
HTTPS Port
This field is for setting the HTTPS port for Web administration. After setting the HTTPS port, the
connection is terminated. The browser settings have to be changed for the new port number before
starting the next session. By default, port 443 is configured for HTTPS sessions. The value of the port
number should lie between 1 and 65535. Well known ports and ports already used by the MultiAccess are
not allowed.
MultiAccess Communications Server MA30120 User Guide
Chapter 3 – Software
Administration > Web Admin
40
Advertisement
Table of Contents
