Cp Workgroup System With Direct Attached Storage Blade Sb40C - HP Cluster Platform Express v2010 Overview
Workgroup system and cluster platform express overview and hardware installation guide
Hide thumbs
Also See for Cluster Platform Express v2010:
- User manual (140 pages) ,
- Overview (94 pages) ,
- Manual (76 pages)
Table of Contents
Advertisement
5.
Compute node 1
6.
Compute node 8
7.
Compute node 7
8.
System interconnect and Administrative network
9.
Compute node 6
10. Compute node 5
11. iLO access
12. Administrative network and system interconnect
13. External File Sharing (CIFS, NFS)
14. LAN or direct connect
15. Clients such as HP ProLiant servers, HP personal computers, or HP workstations
16. HP GbE2c switch
17. DVD drive installed in the external control node
18. iLO management port on the external control node
19. NIC2 on the external control node
20. Connection from the external control node NIC1 port to the HP GbE2c switch
21. DLxxx external control node
22. TFT7600
B.1.3 CP Workgroup System with Direct Attached Storage Blade SB40c
Figure B-3
shows a CP Workgroup System with an SB40c storage blade example. Additional
storage may be provided by an HP StorageWorks SB40c storage blade installed in the server bay
next to the control node server blade. The SB40c may be configured with either SAS or SATA
disks. If the control node is a rack-mountable server, the SB40c cannot be used in the system
configuration.
B.1 Example Configuration Diagrams
65
Advertisement
Table of Contents
