C7000 Psus - HP Cluster Platform Express v2010 Overview

Figure E-1 c7000 PSUs
HP Cluster Platform Express supports high-voltage power connections (200V-240V). Power
requirements can be met by using up to eight single phase PDU's per enclosure as shown in the
table below. PDU's will be mounted in 0U positions.
Number of Enclosures
One enclosure
Two enclosures
Three enclosures
The power cords from the enclosure power supplies plug directly into the PDUs. The power
cords from the optional control node, TFT monitor, and the administration network switch plug
into a power strip that is connected into the second PDU (PDU2). If your configuration has an
optional InfiniBand interconnect, it is plugged into a second power supply that is also connected
to the second PDU.
114 Configuration Rules for CPE BladeSystems
International
Two 32A PDUs
Four 32A PDUs
Six 32A PDUs
US/Japan
Three 24A PDUs
Five 24A PDUs
Eight 24A PDUs