Cpe With Rack-Mountable Servers; Cpe With Rack-Mountable Servers - 42U Rack Configuration; Typical 42U Cpe With Rack-Mountable Servers Configuration - HP Cluster Platform Express v2010 Overview

4 CPE with Rack-Mountable Servers

HP Cluster Platform Express rack-mountable configurations are built around a system interconnect
that might be an HP ProCurve Gigabit Ethernet or a 24-port InfiniBand interconnect.
Chapter 4 discusses the following topics:
• CPE with rack-mountable servers — 42U rack configuration (see
• CPE with rack-mountable servers — 22U rack configuration (see
• CPE with rack-mountable servers site preparation overview (see
• CPE with rack-mountable servers unpacking and removing from shock pallet (see
• CPE with rack-mountable servers installation and startup (see
• CPE with rack-mountable servers post-installation and diagnostics (see
• CPE with rack-mountable servers setting up local networks (see
• CPE with rack-mountable servers operating system information (see
4.1 CPE with Rack-Mountable Servers — 42U Rack Configuration
Figure 4-1 shows a typical CPE solution, configured in a single HP 10000 Series 42U rack. Some
of the components shown here might be optional, or they might be installed in a different location
or orientation with respect to the front and rear of the rack.
Figure 4-1 Typical 42U CPE with Rack-Mountable Servers Configuration
8
5
7
1
2
4
3
5
6
4.1 CPE with Rack-Mountable Servers — 42U Rack Configuration
Section 4.1)
Section 4.2)
Section 4.3)
Section
Section 4.5)
Section 4.6)
Section 4.7)
Section 4.8)
9
4.4)
55