Connecting Locally To A Server Blade With Video And Usb Devices; Accessing A Server Blade With Local Kvm - HP ProLiant BL45p Maintenance And Service Manual

Connect the local I/O cable to the I/O port on the server blade.
2.
CAUTION:
provide a permanent connection. Rear iLO 2 connector performance degrades when the local
I/O cable is connected, even if the iLO 2 connector on the cable is not in use.
CAUTION:
• Completely log out of the current iLO 2 session before disconnecting from the iLO 2 port.
Do not remove the local I/O cable when the UID LED is flashing.
Always squeeze the locking buttons on the side of the server blade connector before
•
disconnecting from the I/O port. Failure to do so can result in damage to the equipment.
Connecting locally to a server blade with video and
USB devices
Use the local I/O cable to connect any of the following USB devices to the server blade:
•
Monitor
•
USB hub
•
USB keyboard
•
USB mouse
•
USB CD-ROM drive
•
USB diskette drive
•
USB drive key
Numerous configurations are possible. This section offers two possible configuration examples.

Accessing a server blade with local KVM

All manuals and user guides at all-guides.com
Disconnect the local I/O cable when not in use. The port and connector do not
Before disconnecting the local I/O cable, observe the following guidelines:
Cabling 82