Mld Version - HP 6125XLG Command Reference Manual

Default
An interface is not a static member of any IPv6 multicast group or IPv6 multicast source and group.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal
number in the range of 0 to F.
ipv6-source-address: Specifies an IPv6 multicast source. If this argument is not specified, the command
configures an interface as a static member of the multicast groups with all IPv6 multicast source
addresses.
all: Specifies all IPv6 multicast groups that the interface has statically joined.
Examples
# Configure VLAN-interface 100 as a static member of the IPv6 multicast group FF03::101.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld static-group ff03::101
# Configure VLAN-interface 100 as a static member of the multicast source and group (2001::101,
FF3E::202).
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld static-group ff3e::202 source 2001::101

mld version

Use mld version to specify the MLD version for an interface.
Use undo mld version to restore the default.
Syntax
mld version version-number
undo mld version
Default
The MLD version is MLDv1.
Views
Interface view
Predefined user roles
network-admin
Parameters
version-number: Specifies an MLD version, 1 or 2.
141