Source-Lifetime (Pim View); Source-Policy (Pim View) - HP 6125XLG Command Reference Manual

Examples
# Configure the device to calculate the checksum based on an entire register message.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-whole-checksum

source-lifetime (PIM view)

Use source-lifetime to set the multicast source lifetime.
Use undo source-lifetime to restore the default.
Syntax
source-lifetime time
undo source-lifetime
Default
The lifetime of a multicast source is 210 seconds.
Views
PIM view
Predefined user roles
network-admin
Parameters
time: Sets the multicast source lifetime (in seconds), in the range of 0 to 31536000. A value of 0 means
that multicast sources are never aged out.
Examples
# Set the multicast source lifetime to 200 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] source-lifetime 200

source-policy (PIM view)

Use source-policy to configure a multicast data filter.
Use undo source-policy to remove the configured multicast data filter.
Syntax
source-policy acl-number
undo source-policy
Default
No multicast data filter is configured.
Views
PIM view
88