Mld-Snooping Overflow-Replace; Mld-Snooping Router-Aging-Time - HP 6125XLG Command Reference Manual

[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping max-response-time 5
Related commands
max-response-time (MLD-snooping view)
•
mld-snooping enable
•

mld-snooping overflow-replace

Use mld-snooping overflow-replace to enable the IPv6 multicast group replacement function on a port.
Use undo mld-snooping overflow-replace to disable the multicast group replacement function on a port.
Syntax
mld-snooping overflow-replace [ vlan vlan-list ]
undo mld-snooping overflow-replace [ vlan vlan-list ]
Default
The IPv6 multicast group replacement function is disabled.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to ten VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If this option is not specified, this command takes effect for all VLANs.
Usage guidelines
This command is effective on the IPv6 multicast groups that a port dynamically joins. If you configure the
port as a static member port for an IPv6 multicast group, this command is not effective on the IPv6
multicast group.
The configuration made in proper interface view is only effective on the current port and takes preference
over the global configuration.
Examples
# Enable the IPv6 multicast group replacement function on Ten-GigabitEthernet 1/1/5 in VLAN 2.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] mld-snooping overflow-replace vlan 2
Related commands
overflow-replace (MLD-snooping view)

mld-snooping router-aging-time

Use mld-snooping router-aging-time to set the aging timer for the dynamic router ports in a VLAN.
115