Pim Hello-Option Override-Interval - HP 6125XLG Command Reference Manual

Examples
# Enable the neighbor tracking function on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option neighbor-tracking
# Disable the neighbor tracking function on VLAN-interface 100 when the neighbor tracking function is
enabled globally.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option neighbor-tracking
[Sysname-pim] quit
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option neighbor-tracking disable
Related commands
hello-option neighbor-tracking (PIM view)

pim hello-option override-interval

Use pim hello-option override-interval to set the override interval on an interface.
Use undo pim hello-option override-interval to restore the default.
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
Default
The override interval is 2500 milliseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the override interval (in milliseconds), in the range of 1 to 65535.
Usage guidelines
You can set the override interval in PIM view or interface view. The configurations made in PIM view are
effective on all interfaces, and the configurations made in interface view are effective on only the current
interface. If you set the override interval in both PIM view and interface view, the configuration in
interface view always takes precedence.
Examples
# Set the override interval to 2000 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option override-interval 2000
80