Mld-Snooping Enable - HP 6125XLG Command Reference Manual

Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.
The configuration made in VLAN view is only effective on the current VLAN and takes preference over the
global configuration.
Examples
# Enable MLD snooping and the function of dropping unknown IPv6 multicast data for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping drop-unknown
Related commands

mld-snooping enable

mld-snooping enable
Use mld-snooping enable to enable MLD snooping for a VLAN.
Use undo mld-snooping enable to disable MLD snooping for a VLAN.
Syntax
mld-snooping enable
undo mld-snooping enable
Default
MLD snooping is disabled in a VLAN.
Views
VLAN view
Predefined user roles
network-admin
Usage guidelines
You must enable MLD snooping globally before you enable MLD snooping for a VLAN.
Examples
# Enable MLD snooping globally and for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
Related commands
mld-snooping
109