Register-Policy (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

undo jp-pkt-size
Default
The maximum size of a join/prune message is 8100 bytes.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
size: Sets the maximum size (in bytes) of each join/prune message, in the range of 100 to 64000.
Examples
# Set the maximum size of each join/prune message to 1500 bytes.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] jp-pkt-size 1500

register-policy (IPv6 PIM view)

Use register-policy to configure an IPv6 ACL rule to filter register messages.
Use undo register-policy to remove the configured register filtering rule.
Syntax
register-policy acl6-number
undo register-policy
Default
No register filtering rule is configured.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
acl6-number: Specifies an IPv6 advanced ACL, in the range of 3000 to 3999.
Usage guidelines
Use an IPv6 advanced ACL to filter register messages based on source IPv6 addresses and IPv6 multicast
group addresses. If you specify a VPN instance in the ACL, the ACL does not take effect. The other
optional parameters except the fragment keyword and the time-range keyword are ignored.
The RP accepts only register messages that match the permit statement of the ACL.
Examples
# Configure a register filtering policy on the RP so that the RP can accept only those register messages
from IPv6 multicast sources on the 3:1::/64 subnet for IPv6 multicast groups on the FF0E:13::/64 subnet.
<Sysname> system-view
177