Version: 3
Host-aging-time: 260s
Router-aging-time: 260s
Max-response-time: 10s
Last-member-query-interval: 1s
Table 1 Command output
Field
IGMP snooping
Drop-unknown
Version
Host-aging-time
Router-aging-time
Max-response-time
Last-member-query-interval
display igmp-snooping group
Use display igmp-snooping group to display information about dynamic IGMP snooping forwarding
entries.
Syntax
display igmp-snooping group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to
239.255.255.255. If no multicast group is specified, this command displays information about the
dynamic IGMP snooping forwarding entries for all multicast groups.
source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this
command displays information about the dynamic IGMP snooping forwarding entries for all multicast
sources.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about the dynamic IGMP snooping forwarding entries for
all VLANs.
Description
IGMP snooping status:
•
Enabled.
•
Disabled.
Status of dropping unknown multicast data:
•
Enabled.
•
Disabled.
IGMP snooping version.
Aging timer for the dynamic member port.
Aging timer for the dynamic router port.
Maximum response time for IGMP general queries.
Interval for sending IGMP group-specific queries.
2