Multicast Load-Splitting; Multicast Longest-Match - HP 6125XLG Command Reference Manual

Examples
# Configure VLAN-interface 100 as the forwarding boundary of multicast groups in the range of
239.2.0.0/16.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] multicast boundary 239.2.0.0 16
Related commands
display multicast boundary

multicast load-splitting

Use multicast load-splitting to enable load splitting of multicast traffic.
Use undo multicast load-splitting to restore the default.
Syntax
multicast load-splitting { source | source-group }
undo multicast load-splitting
Default
Load splitting of multicast traffic is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
source: Specifies load splitting on a per-source basis.
source-group: Specifies load splitting both on a per-source basis and on a per-group basis.
Examples
# Enable load splitting of multicast traffic on a per-source basis.
<Sysname> system-view
[Sysname] multicast load-splitting source

multicast longest-match

Use multicast longest-match to configure the device to select the RPF route based on the longest prefix
match principle.
Use undo multicast longest-match to restore the default.
Syntax
multicast longest-match
undo multicast longest-match
Default
The device selects the route with the highest priority as the RPF route.
40