Specifying An Mld Snooping Version - HP FlexFabric 5700 Series Configuration Manual

Step
2. Enable MLD snooping
globally and enter
MLD-snooping view.
3. Return to system view.
4. Enter VLAN view.
5. Enable MLD snooping for the
VLAN.

Specifying an MLD snooping version

Different MLD snooping versions can process different versions of MLD messages:
MLDv1 snooping can process MLDv1 messages, but it floods MLDv2 messages in the VLAN
•
instead of processing them.
MLDv2 snooping can process MLDv1 and MLDv2 messages.
•
If you change MLDv2 snooping to MLDv1 snooping, the system does the following:
Clears all MLD snooping forwarding entries that are dynamically created.
•
Keeps static MLDv2 snooping forwarding entries (*, G).
•
• Clears static MLDv2 snooping forwarding entries (S, G), which will be restored when MLD
snooping is switched back to MLDv2 snooping.
For more information about static MLD snooping forwarding entries, see
You can specify an MLD snooping version for a VLAN in MLD-snooping view or in VLAN view. These
configurations have the same priority level.
To specify an MLD snooping version for a VLAN in MLD-snooping view:
Step
1. Enter system view.
2. Enable MLD snooping
globally and enter
MLD-snooping view.
3. Specify an MLD snooping
version for the specified
VLANs.
To specify an MLD snooping version for a VLAN in VLAN view:
Step
1. Enter system view.
2. Enter VLAN view.
3. Specify an MLD snooping
version for the VLAN.
Command
mld-snooping
quit
vlan vlan-id
mld-snooping enable
Command
system-view
mld-snooping
version version-number vlan vlan-list
Command
system-view
vlan vlan-id
mld-snooping version
version-number
65
Remarks
By default, MLD snooping is
globally disabled.
N/A
N/A
By default, MLD snooping is
disabled in a VLAN.
"Configuring static
Remarks
N/A
N/A
The default setting is 1.
Remarks
N/A
N/A
The default setting is 1.
ports."