Display Pim Routing-Table - HP 6125XLG Command Reference Manual

Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Table 23 Command output
Field
Neighbor
Interface
Uptime
Expires/Expiry time
DR-Priority/DR Priority
Generation ID
Holdtime
LAN delay
Override interval
State refresh interval
Neighbor tracking

display pim routing-table

Use display pim routing-table to display PIM routing table information.
Syntax
display pim routing-table [ group-address [ mask { mask-length | mask } ] | source-address [ mask
{ mask-length | mask } ] | flags flag-value | fsm | incoming-interface interface-type interface-number |
mode mode-type | outgoing-interface { exclude | include | match } interface-type interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Description
IP address of the PIM neighbor.
Interface that connect to the PIM neighbor.
Length of time the PIM neighbor has been up.
Time remaining of the PIM neighbor lifetime, where "never" means that
the PIM neighbor is always up and reachable.
Priority of the PIM neighbor.
Generation ID of the PIM neighbor. (A random value that indicates a
status change of the PIM neighbor.)
Lifetime of the PIM neighbor, where "forever" means that the PIM neighbor
is always up and reachable.
Delay for sending prune messages.
Interval between two override messages.
Interval for refreshing state. This field is displayed only when the PIM
neighbor operates in PIM-DM mode and the state refresh capability is
enabled.
Neighbor tracking status: enabled/disabled.
65