Igmp-Snooping Max-Response-Time - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
interval: Sets the IGMP last-member query interval, in the range of 1 to 5.
Usage guidelines
The IGMP last-member query interval determines the interval for sending IGMP group-specific queries
and the maximum response time for IGMP group-specific queries in a VLAN.
You must enable IGMP snooping for a VLAN before you configure this command for the VLAN.
The configuration made in VLAN view is only effective on the current VLAN and takes preference over the
global configuration.
Examples
# Enable IGMP snooping for VLAN 2 and set the IGMP last-member query interval to 3 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping last-member-query-interval 3
Related commands
igmp-snooping enable
•
last-member-query-interval (IGMP-snooping view)
•

igmp-snooping max-response-time

Use igmp-snooping max-response-time to set the maximum response time for IGMP general queries in
the VLAN.
Use undo igmp-snooping max-response-time to restore the default.
Syntax
igmp-snooping max-response-time interval
undo igmp-snooping max-response-time
Default
The default setting is 10 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interval: Sets the maximum response time (in seconds) for IGMP general queries, in the range of 1 to 25.
Usage guidelines
You must enable IGMP snooping for a VLAN before you configure this command for the VLAN.
18