Holdtime Join-Prune (Pim View) - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
interval: Sets the override interval (in milliseconds), in the range of 1 to 65535.
Usage guidelines
You can set the override interval in PIM view or interface view. The configurations made in PIM view are
effective on all interfaces, and the configurations made in interface view are effective on only the current
interface. If you set the override interval in both PIM view and interface view, the configuration in
interface view always takes precedence.
Examples
# Set the global override interval to 2000 milliseconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option override-interval 2000
Related commands
hello-option lan-delay (PIM view)
•
pim hello-option lan-delay
•
pim hello-option override-interval
•

holdtime join-prune (PIM view)

Use holdtime join-prune to set the global joined/pruned state holdtime timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune time
undo holdtime join-prune
Default
The global joined/pruned state holdtime timer is 210 seconds.
Views
PIM view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer (in seconds), in the range of 1 to 65535.
Usage guidelines
You can set the joined/pruned state holdtime timer in PIM view or interface view. The configurations
made in PIM view are effective to all interfaces and the configurations made in interface view are
effective to only the current interface. If you set the joined/pruned state holdtime timer in both PIM view
and interface view, the configuration in interface view always takes precedence.
73