Display Mld-Snooping Router-Port - HP 6125XLG Command Reference Manual

Blade switch ip multicast command reference
Table of Contents

Advertisement

ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no multicast source is
specified, this command displays information about the dynamic MLD snooping forwarding entries for
all IPv6 multicast sources.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about the dynamic MLD snooping forwarding entries for
all VLANs.
verbose: Displays detailed information.
slot slot-number: Specifies a member device by its member ID. The slot-number argument represents the
member ID of a device in the IRF fabric. If no member device is specified, this command displays
information about the dynamic MLD snooping forwarding entries on the master device in the IRF fabric.
Examples
# Display information about the dynamic MLD snooping forwarding entries in VLAN 2.
<Sysname> display mld-snooping group vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Host slots (0 in total):
Host ports (1 in total):
XGE1/1/6
Table 29 Command output
Field
Total 1 entries
VLAN 2: Total 1 entries
(::, FF1E::101)
Host ports (1 in total)
(00:03:23)
Related commands
reset mld-snooping group

display mld-snooping router-port

Use display mld-snooping router-port to display information about dynamic router ports.
Syntax
display mld-snooping router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
(00:03:23)
Description
Total number of dynamic MLD snooping forwarding entries.
Total number of dynamic MLD snooping forwarding entries in VLAN.
(S, G) entry, where "::" represents any IPv6 multicast source.
Total number of member ports and the port list.
Remaining time of the aging timer for the dynamic member port. On IRF devices,
to display the remaining time for a non-aggregate interface on a member device
that is not the master device in the IRF fabric, you must specify the slot slot-number
option. For an aggregate interface, you do not need to do this.
99

Advertisement

Table of Contents
loading

Table of Contents