Mld-Snooping Fast-Leave; Mld-Snooping Group-Limit - HP 6125XLG Command Reference Manual

mld-snooping fast-leave

Use mld-snooping fast-leave to enable MLD snooping fast-leave processing on a port.
Use undo mld-snooping fast-leave to disable MLD snooping fast-leave processing on a port.
Syntax
mld-snooping fast-leave [ vlan vlan-list ]
undo mld-snooping fast-leave [ vlan vlan-list ]
Default
MLD snooping fast-leave processing is disabled on a port.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to ten VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If this option is not specified, this command takes effect for all VLANs.
Usage guidelines
When an MLD done message arrives at a port with the MLD snooping fast-leave processing feature
enabled, the switch immediately removes that port from the forwarding entry for the multicast group
specified in the done message.
The configuration made in proper interface view is only effective on the current port and takes preference
over the global configuration.
Examples
# Enable MLD snooping fast-leave processing on Ten-GigabitEthernet 1/1/5 in VLAN 2.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] mld-snooping fast-leave vlan 2
Related commands
fast-leave (MLD-snooping view)

mld-snooping group-limit

Use mld-snooping group-limit to set the maximum number of IPv6 multicast groups that a port can join.
Use undo mld-snooping group-limit to restore the default.
Syntax
mld-snooping group-limit limit [ vlan vlan-list ]
undo mld-snooping group-limit [ vlan vlan-list ]
110