Entry-Limit (Mld-Snooping View) - HP 6125XLG Command Reference Manual

Sent MLDv2 specific queries:
Sent MLDv2 specific sg queries:
Received error MLD messages:
Table 33 Command output
Field
general queries
specific queries
reports
dones
reports with right and wrong records
specific sg queries
error MLD messages
Related commands
reset mld-snooping statistics

entry-limit (MLD-snooping view)

Use entry-limit to set the global maximum number of MLD snooping forwarding entries.
Use undo entry-limit to restore the default.
Syntax
entry-limit limit
undo entry-limit
Default
The default setting is 4294967295.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
limit: Specifies the global maximum number of MLD snooping forwarding entries, in the range of 0 to
4294967295.
Examples
# Set the global maximum number of MLD snooping forwarding entries to 512.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512
0
0
0
Description
Number of general queries.
Number of multicast-address-specific queries.
Number of reports.
Number of done messages.
Number of reports with correct and incorrect records.
Number of multicast-address-and-source-specific queries.
Number of MLD messages with errors.
103