MLD commands
display mld group
Use display mld group to display MLD group information.
Syntax
display mld group [ ipv6-group-address | interface interface-type interface-number ] [ static | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal
number in the range of 0 to F. If no multicast group is specified, the command displays information about
all MLD groups.
interface interface-type interface-number: Specifies an interface by its type and number. If no interface
is specified, the command displays the MLD group information on all interfaces.
static: Specifies MLD groups that the interfaces statically joined. If the static keyword is not specified, the
command displays information about the MLD groups that the interface has dynamically joined.
verbose: Displays detailed information about MLD groups.
Examples
# Display detailed information about MLD groups that all interfaces have dynamically joined.
<Sysname> display mld group verbose
Vlan-interface1(FE80::101):
MLD groups reported in total: 1
Group: FF03::101
Uptime: 00:01:46
Expires: Off
Last reporter: FE80::10
Last-listener-query-counter: 0
Last-listener-query-timer-expiry: Off
Group mode: Include
Version1-host-present-timer-expiry: Off
Source list (sources in total: 1):
Source: 10::10
Uptime: 00:00:09
Expires: 00:04:11
Last-listener-query-counter: 0
135