Hello-Option Override-Interval (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

Usage guidelines
You can enable the neighbor tracking function in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you enable the neighbor tracking function in both IPv6 PIM view
and interface view, the configuration in interface view always takes precedence.
Examples
# Enable the neighbor tracking function globally.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option neighbor-tracking
Related commands
ipv6 pim hello-option neighbor-tracking

hello-option override-interval (IPv6 PIM view)

Use hello-option override-interval to set the global override interval.
Use undo hello-option override-interval to restore the default.
Syntax
hello-option override-interval interval
undo hello-option override-interval
Default
The global override interval is 2500 milliseconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
interval: Sets the override interval (in milliseconds), in the range of 1 to 65535.
Usage guidelines
You can set the override interval in IPv6 PIM view or interface view. The configurations made in IPv6 PIM
view are effective on all interfaces, and the configurations made in interface view are effective on only
the current interface. If you set the override interval in both IPv6 PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the global override interval to 2000 milliseconds.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option override-interval 2000
Related commands
• hello-option lan-delay (IPv6 PIM view)
163