HP 6125XLG Command Reference Manual page 157

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
local: Specifies local C-RPs. If this keyword is not specified, this command displays information about all
C-RPs.
Usage guidelines
You can display information about learned C-RPs on only the BSR. On other devices, you can display
information about the locally configured C-RPs.
Examples
# Display information about learned C-RPs.
<Sysname> display ipv6 pim c-rp
Scope: non-scoped
Group/MaskLen: FF00::/8
C-RP address
8:12::2 (local)
Group/MaskLen: FF23::/92 Expires: 00:02:07
# Display information about the locally configured C-RPs.
<Sysname> display ipv6 pim c-rp local
Candidate RP: 8:12::2(Loop1)
Priority: 192
HoldTime: 150
Advertisement interval: 60
Next advertisement scheduled at: 00:00:46
Table 43 Command output
Field
Group/MaskLen
HoldTime
Uptime
Expires
Candidate RP
Advertisement interval
Next advertisement scheduled at
Priority HoldTime
192 150
Description
IPv6 multicast group to which the C-RP is designated.
C-RP lifetime.
Length of time the C-RP has been up, where "w" means weeks, "d" means
days, and "h" means hours.
Remaining time of the C-RP/IPv6 multicast group lifetime.
IPv6 address of the locally configured C-RP.
Interval between two advertisement messages sent by the locally
configured C-RP.
Time remaining for the locally configured C-RP to send the next
advertisement message.
151
Uptime Expires
00:27:48 00:01:43