Igmp-Snooping Static-Router-Port - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to
239.255.255.255.
source-address: Specifies a multicast source by its IP address.
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Usage guidelines
The source-ip source-address option is meaningful only for IGMPv3 snooping. If IGMPv2 snooping is
running, the source-ip source-address option does not take effect, although you can include source-ip
source-address in the command.
Examples
# Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static member port for the multicast source and
group (1.1.1.1, 225.0.0.1).
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
[Sysname-vlan2] quit
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping static-group 225.0.0.1 source-ip
1.1.1.1 vlan 2

igmp-snooping static-router-port

Use igmp-snooping static-router-port to configure a port as a static router port.
Use undo igmp-snooping static-router-port to restore the default.
Syntax
igmp-snooping static-router-port vlan vlan-id
undo igmp-snooping static-router-port { all | vlan vlan-id }
Default
A port is not a static router port.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
all: Specifies all VLANs.
22