Fax; Printer - Kyocera TASKalfa 4501i Operation Manual

Setup and Registration (System Menu) > System Menu

FAX

FAX

Configure settings for FAX. For details, refer to the FAX Operation Guide.

Printer

Printer

When printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Item
Emulation
Alt Emulation
KPDL Error Report
EcoPrint
Toner Save Level (EcoPrint)
Override A4/Letter
Duplex
Copies
Set the emulation for operating this machine by commands oriented to other types of printers.
Value: PCL6, IBM Proprinter, Line Printer, EPSON LQ-850, KPDL, KPDL(Auto)
NOTE
IBM Proprinter, Line Printer, and EPSON LQ-850 are displayed when the optional Emulation
Upgrade Kit is installed.
If you selected [KPDL(Auto)], set "Alternative Emulation", too.
When you have selected [KPDL] or [KPDL(Auto)], set "KPDL Error Report", too.
When you have selected [KPDL(Auto)] as emulation mode, you can switch between KPDL and
another emulation mode (alternative emulation) automatically according to the data to print.
Value: PCL6, IBM Proprinter, Line Printer, EPSON LQ-850
NOTE
IBM Proprinter, Line Printer, and EPSON LQ-850 are displayed when the optional Emulation
Upgrade Kit is installed.
When an error has occurred during printing in KPDL emulation mode, set whether the error
report is output.
Value: Off, On
EcoPrint conserves toner when printing. This is recommended for test copies where lighter
printing is not a problem.
Value: Off, On
Select the default Toner Save Level (EcoPrint).
Value: 1 (Low) to 5 (High)
NOTE
Raising the level reduces toner consumption, but image quality falls.
Select whether to treat A4 size and Letter, which are similar in size, as the same size when
printing.
Value
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use whichever size
is in the paper source.
Select binding orientation for duplex mode.
Value: 1-sided, 2-sided(Bind Long Edge), 2-sided(Bind Short Edge)
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
8-35
Description