Kyocera TASKalfa 4501i Operation Manual page 156

Preparation before Use > Registering Destinations in the Address Book
The Folder (FTP) Address
Press [Change] of "Host Name", "Path", "Login User Name" and "Login Password", enter the
information for each item and press [OK].
The table below explains the items to be entered.
Item
Host Name* Host name or IP address of FTP server
Path Path for the file to be stored
For example, "User¥ScanData".
If no path is entered, the file is stored in the home
directory.
Login User Name FTP server login user name
Login Password FTP server login password
* If you specify a port number other than the default (21), use the "Host name: port number"
(Example: FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE
• Refer to the Character Entry Method on page 11-10
• Press [Connection Test] to check the connection to the FTP server you chose. If the
connection fails, check the entries you made.
2
Check if the destination entry is correct and press [Save]. The destination is added to the
Address Book.
To register the registered address in a one-touch key, press [Yes] in the pop-up screen that appears
after [Save] is pressed.
NOTE
To register a new One Touch Key, refer to
Touch Key) on page 3-54.
Descriptions
for details on entering characters.
Adding a Destination on One Touch Key (One
3-50
Max. No. of
Characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters