Apply Limit; Copier/Printer Count - Kyocera TASKalfa 4501i Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Job Accounting Setting

Apply Limit

This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item
Immediately
Subsequently
Alert Only
* The next job will be prohibited in sending or in storing in the box.
1
2

Copier/Printer Count

You can select how the copying and printing page counts are shown - either the total of both or each of copying and
printing individually. The selection may influence restriction on the count and count method. For details, refer to
Restricting the Use of the Machine (page
Accounting Report (page
1
2
*
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the subsequent job will be
rejected.
Job continues while displaying an alert message.
Display the screen.
1
Referring to Job Accounting Setting on page
screen.
2
Press [Change] of "Apply Limit".
Configure the settings.
1
Select [Immediately], [Subsequently], or [Alert Only].
2
Press [OK].
9-34), Counting the Number of Pages Printed (page
9-31).
Display the screen.
1
Referring to Job Accounting Setting on page
screen.
2
Press [Change] of "Copier/Printer Count".
Configure the settings.
1
Press [Total] or [Individual].
2
Press [OK].
Descriptions
9-27, display the job accounting access
9-27, display the job accounting access
9-40
9-38), and Print