Paper; Basic Paper Specifications - Kyocera TASKalfa 4501i Operation Manual

3501i/4501i/5501i operation guide rev-1 2013.6
Hide thumbs Also See for TASKalfa 4501i:
Table of Contents

Advertisement

Appendix > Paper

Paper

This section explains the paper sizes and types that can be used in the paper source.
For details on the sizes, types, and number of sheets of paper that can be loaded in each paper tray, refer to
page
11-22.

Basic Paper Specifications

This machine is designed to print on standard copy paper as used in regular ('dry') copiers and page printers such as
laser printers. It also supports a variety of other types of paper that conform to the specifications given in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or may be wrinkled.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The printing quality will be affected by the quality of paper.
Poor quality paper may result in unsatisfactory output.

Basic Paper Specifications

The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent sections
for further details.
Criteria
Weight
Dimensional accuracy
Squareness of corners
Moisture content
Pulp content
NOTE
Some recycled paper does not meet requirements for use with this machine as listed in the Basic Paper Specifications
shown below, such as moisture or pulp content. For this reason, we recommend purchasing a small amount of
recycled paper as a sample for testing prior to use. Choose recycled paper that gives the best printing results and
contains low levels of paper dust.
We are not responsible for the problems occurred from the use of paper that does not conform to our specifications.
2
Cassettes: 60 to 220 g/m
Multi purpose tray: 60 to 300 g/m
±0.7 mm
90° ±0.2°
4 to 6%
80% or more
Specifications
2
11-13
Specifications on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 5501iTaskalfa 3501i

Table of Contents