Default Settings Of The Machine; Setting Date And Time - Kyocera TASKalfa 4501i Operation Manual

Installing and Setting up the Machine > Default Settings of the Machine

Default Settings of the Machine

The default settings of the machine can be changed in System Menu. Before using this machine, configure such settings
as date and time, network configuration, and energy saving functions as needed.
NOTE
For settings that are configurable from System Menu, refer to

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and
password, and press [Login].
The factory default login user name and login password are set as shown below.
3501i
4501i
5501i
Be sure to set the time difference before setting the date and time.
If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Application (page 5-10)
Optional Applications (page 11-8)
1
Model Name
3500
4500
5500
Display the screen.
Press the [System Menu] key and select [Date/Timer/Energy Saver].
1
Setup and Registration (System Menu) (page
Login User Name
3500
4500
5500
2-23
Login Password
System Menu
Edit Destination User Login/Job Accounting
3
User Property Date/Timer/Energy Saver
Adjustment/Maintenance Internet
Application
Press [
scroll up and down.
8-1).
2
2/2
Close
] or [ ] to