Status Screen In Easy Mode - ZyXEL Communications NBG5715 User Manual

Figure 30 Wireless Security: WPS
The following table describes the labels in this screen.
Table 19 Wireless Security: WPS
LABEL
Wireless Security
WPS
Register
Exit

7.6 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the NBG5715.
NBG5715 User's Guide
DESCRIPTION
Click this to go back to the Wireless Security screen.
Create a secure wireless network simply by pressing a button.
The NBG5715 scans for a WPS-enabled device within the range and performs
wireless security information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second
wireless station, you have to press these buttons on both device and the
wireless station again after the first 2 minutes.
Create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the NBG5715's interface and pushing this
button.
Type the same PIN number generated in the wireless station's utility. Then click
Register to associate to each other and perform the wireless security
information synchronization.
Click Exit to close this screen.
Chapter 7 Easy Mode
49