Status Screen In Easy Mode - ZyXEL Communications NBG5615 User Manual

Chapter 6 Easy Mode
Figure 33 Wireless Security: WPS
The following table describes the labels in this screen.
Table 22 Wireless Security: WPS
LABEL
Wireless Security
WPS
Register
Exit

6.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the NBG5615.
54
DESCRIPTION
Click this to go back to the Wireless Security screen.
Create a secure wireless network simply by pressing a button.
The NBG5615 scans for a WPS-enabled device within the range and performs wireless
security information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
Create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the NBG5615's interface and pushing this button.
Type the same PIN number generated in the wireless station's utility. Then click Register
to associate to each other and perform the wireless security information synchronization.
Click Exit to close this screen.
NBG5615 User's Guide