The Qos Screen; The Wps Screen - ZyXEL Communications NBG5715 User Manual

Table 34 Network > Wireless LAN 2.4G/5G > Advanced (continued)
LABEL
Intra-BSS Traffic
advance tx
power
Apply
Cancel

11.6 The QoS Screen

The QoS (Quality of Service) screen allows you to automatically give a service (such as VoIP and
video) a priority level.
Click Network > Wireless LAN 2.4G/5G > QoS. The following screen appears.
Figure 50 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN 2.4G/5G > QoS
LABEL
Enable WMM QoS
Apply
Cancel

11.7 The WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS tab.
NBG5715 User's Guide
DESCRIPTION
A Basic Service Set (BSS) exists when all communications between wireless
clients or between a wireless client and a wired network client go through one
access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is
enabled, wireless clients can access the wired network and communicate with
each other. When Intra-BSS is disabled, wireless clients can still access the wired
network but cannot communicate with each other.
Set the output power of the NBG5715 in this field. If there is a high density of APs
in an area, decrease the output power of the NBG5715 to reduce interference with
other APs. Select one of the following 100%, 90%, 75%, 50%, 25% or 10%.
See the product specifications for more information on your NBG5715's output
power.
Click Apply to save your changes back to the NBG5715.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Check this to have the NBG5715 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS
(Wifi MultiMedia Quality of Service) gives high priority to voice and video,
which makes them run more smoothly.
Click Apply to save your changes to the NBG5715.
Click Cancel to reload the previous configuration for this screen.
Chapter 11 Wireless LAN
87