The Share Center Configuration Window; The Auto-Connect Printer List Window - ZyXEL Communications NBG5715 User Manual

Chapter 3 ZyXEL NetUSB Share Center Utility

3.2.2 The Share Center Configuration Window

This section describes the utility's configuration window, which allows you to set certain options for
the utility. These options do not apply to the USB devices connected to the NBG5715.
You can open it by clicking the Tools > Configuration menu command.
Figure 8 ZyXEL NetUSB Share Center Utility Configuration Window
The following table describes the labels in this window.
Table 5 ZyXEL NetUSB Share Center Utility Configuration Window
LABEL
Basic
Language
OK
Cancel
Apply

3.2.3 The Auto-Connect Printer List Window

This section describes the utility's auto-connect printer list window. You can open it by clicking the
Tools > Auto-Connect Printer List menu command.
Figure 9 ZyXEL NetUSB Share Center Utility Auto-Connect Printer List Window
26
DESCRIPTION
Select this to run the utility automatically when you log into or start up
Windows.
Select a language for the ZyXEL NetUSB Share Center Utility. You must
restart the utility for the change to take effect.
Click this to save your changes and close the window.
Click this cancel to close the window without saving.
Click this to save your changes without closing the window.
NBG5715 User's Guide