ZyXEL Communications NBG5715 User Manual page 113

The following table describes the labels in this screen.
Table 51 Static Route: Add/Edit
LABEL
Static Route
Route Name
Destination IP
Address
IP Subnet Mask
Gateway IP
Address
Back
Apply
Cancel
NBG5715 User's Guide
DESCRIPTION
Select to enable or disable this rule.
Type a name to identify this rule. You can use up to printable English keyboard
characters, including spaces.
This parameter specifies the IP network address of the final destination. Routing
is always based on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the
network number to be identical to the host ID.
Enter the IP subnet mask here.
Enter the IP address of the next-hop gateway. The gateway is a router or switch
on the same segment as your NBG5715's interface(s). The gateway helps forward
packets to their destinations.
Click Back to return to the previous screen without saving.
Click Apply to save your changes back to the NBG5715.
Click Cancel to set every field in this screen to its last-saved value.
Chapter 16 Static Route
113